The hot-dip galvanized square tube is a square tube formed by a series of chemical reactions in the hot-dip galvanized pool, which is made of rolled steel plates or steel strips and welded; It is also a hollow square section steel pipe that can be formed by cold bending hot rolled or cold rolled galvanized steel strip and high-frequency welding. The production process of tubes is simple, the production efficiency is high, the varieties and specifications are many, and the equipment resources are few, but the general strength is lower than that of seamless square tubes.
Performance
It has good strength, toughness, plasticity, welding and other processing properties and good ductility
Welcome to contact Yuantai Derun, e-mail: sales@ytdrgg.com , real-time connection factory inspection or factory visit!
Manufacturer's standard of seamless square and rectangular pipe and specification and size table of square and rectangular pipe
Current customization standards and material properties of hot-dip galvanized square tube welded square tube
Remark: reference table of standards executed by the manufacturer of seamless square tube(Note: the wall thickness of steel pipe is 6-50mm, and the length is 6-18m)
| O.D(mm) | Thickness(mm) |
|
Thickness(mm) | O.D(mm) | Thickness(mm) | O.D(mm) | Thickness(mm) | |
| 20*20 | 1.3 | 60*120 80*100 90*90 | 1.50 | 180*180 | 3 | 300*800 400*700 550*550 500*600 | ||
| 1.4 | 1.70 | 3.5-3.75 | 9.5-9.75 | |||||
| 1.5 | 1.80 | 4.5-4.75 | 11.5-11.75 | |||||
| 1.7 | 2.00 | 5.5-7.75 | 12-13.75 | |||||
| 1.8 | 2.20 | 9.5-9.75 | 15-50 | |||||
| 2.0 | 2.5-4.0 | 11.5-11.75 | ||||||
| 20*30 25*25 | 1.3 | 4.25-4.75 | 12.0-25.0 | |||||
| 1.4 | 5.0-6.3 | 100*300 150*250 200*200 | 2.75 | 300*900 400*800 600*600 500*700 | ||||
| 1.5 | 7.5-8 | 3.0-4.0 | 9.5-9.75 | |||||
| 1.7 | 50*150 60*140 80*120 100*100 | 1.50 | 4.5-9.75 | 11.5-11.75 | ||||
| 1.8 | 1.70 | 11.5-11.75 | 12-13.75 | |||||
| 2.0 | 2.00 | 12.5-12.75 | 15-50 | |||||
| 2.2 | 2.20 | 13.5-13.75 | ||||||
| 2.5-3.0 | 2.5-2.75 | 15.5-30 | ||||||
| 20*40 25*40 30*30 30*40 | 1.3 | 3.0-4.75 | 150*300 200*250 | 3.75 | 300*1000 400*900 500*800 600*700 650*650 | |||
| 1.4 | 5.5-6.3 | 4.5-4.75 | ||||||
| 1.5 | 7.5-7.75 | 5.5-6.3 | 9.5-9.75 | |||||
| 1.7 | 9.5-9.75 | 7.5-7.75 | 11.5-11.75 | |||||
| 1.8 | 11.5-16 | 9.5-9.75 | 12-13.75 | |||||
| 2.0 | 60*160 80*140 100*120 | 2.50 | 11.5-11.75 | 15-50 | ||||
| 2.2 | 2.75 | 13.5-30 | ||||||
| 2.5-3.0 | 3.0-4.75 | 200*300 250*250 | 3.75 | 400*1000 500*900 600*800 700*700 | ||||
| 3.25-4.0 | 5.5-6.3 | 4.5-4.75 | ||||||
| 25*50 30*50 30*60 40*40 40*50 40*60 50*50 | 1.3 | 7.5-7.75 | 5.5-6.3 | 9.5-9.75 | ||||
| 1.4 | 9.5-16 | 7.5-7.75 | 11.5-11.75 | |||||
| 1.5 | 75*150 | 2.50 | 9.5-9.75 | 12-13.75 | ||||
| 1.7 | 2.75 | 11.5-11.75 | 15-50 | |||||
| 1.8 | 3.0-3.75 | 12-13.75 | ||||||
| 2.0 | 4.5-4.75 | 15.5-30 | ||||||
| 2.2 | 5.5-6.3 | 200*400 250*350 300*300 | 4.5-6.3 | 500*1000 600*900 700*800 750*750 | ||||
| 2.5-3.0 | 7.5-7.75 | 7.5-7.75 | 9.5-9.75 | |||||
| 3.25-4.0 | 9.5-16 | 9.5-9.75 | 11.5-11.75 | |||||
| 4.25-4.75 | 80*160 120*120 | 2.50 | 11.5-11.75 | 12-13.75 | ||||
| 5.0-5.75 | 2.75 | 12-13.75 | 15-50 | |||||
| 5.75-6.3 | 3.0-4.75 | 15.5-30 | ||||||
| 40*80 50*70 50*80 60*60 | 1.3 | 5.5-6.3 | 200*500 250*450 300*400 350*350 | 5.5-6.3 | 500*1100 600*900 700*800 750*750 | |||
| 1.5 | 7.5-7.75 | 7.5-7.75 | 9.5-9.75 | |||||
| 1.7 | 9.5-9.75 | 9.5-9.75 | 11.5-11.75 | |||||
| 1.8 | 11.5-20 | 11.5-11.75 | 12-13.75 | |||||
| 2.0 | 100*150 | 2.50 | 12-13.75 | 15-50 | ||||
| 2.2 | 2.75 | 15.5-30 | ||||||
| 2.5-3.0 | 3.0-4.75 | 280*280 | 5.5-6.3 | 600*1100 700*1000 800*900 850*850 | ||||
| 3.25-4.0 | 5.5-6.3 | 7.5-7.75 | 9.5-9.75 | |||||
| 4.25-4.75 | 7.5-7.75 | 9.5-9.75 | 11.5-11.75 | |||||
| 5.0-6.0 | 9.5-9.75 | 11.5-11.75 | 12-13.75 | |||||
| 40*100 60*80 70*70 | 1.3 | 11.5-20 | 12-13.75 | 15-50 | ||||
| 1.5 | 100*200 120*180 150*150 | 2.50 | 15.5-30 | |||||
| 1.7 | 2.75 | 350*400 300*450 | 7.5-7.75 | 700*1100 800*1000 900*900 | ||||
| 1.8 | 3.0-7.75 | 9.5-9.75 | 11.5-11.75 | |||||
| 2.0 | 9.5-9.75 | 11.5-11.75 | 12-13.75 | |||||
| 2.2 | 11.5-20 | 12-13.75 | 15-50 | |||||
| 2.5-3.0 | 100*250 150*200 | 3.00 | 15.5-30 | |||||
| 3.25-4.0 | 3.25-3.75 | 200*600 300*500 400*400 | 7.5-7.75 | 800*1100 900*1000 950*950 | ||||
| 4.25-4.75 | 4.25-4.75 | 9.5-9.75 | 11.5-11.75 | |||||
| 5.0-6.3 | 9.5-9.75 | 11.5-11.75 | 12-13.75 | |||||
| 50*100 60*90 60*100 75*75 80*80 | 1.3 | 11.5-11.75 | 12-13.75 | 15-50 | ||||
| 1.5 | 12.25 | 15.5-40 | ||||||
| 1.7 | 140*140 | 3.0-3.75 | 300*600 400*500 400*400 | 7.5-7.75 | 900*1100 1000*1000 800*1200 | |||
| 1.8 | 4.5-6.3 | 9.5-9.75 | ||||||
| 2.0 | 7.5-7.75 | 11.5-11.75 | 20-60 | |||||
| 2.2 | 9.5-9.75 | 12-13.75 | ||||||
| 2.5-3.0 | 11.5-25 | 15.5-40 | ||||||
| 3.25-4.0 | 160*160 | 3.00 | 400*600 500*500 | 9.5-9.75 | 1100*1000 1100*1100 | |||
| 4.25-4.75 | 3.5-3.75 | 11.5-11.75 | 20-60 | |||||
| 5.0-5.75 | 4.25-7.75 | 12-13.75 | ||||||
| 7.5-8 | 9.5-25 | 15.5-40 |
What is the difference between square tube and seamless square tube?
There are small differences between tubes of different names. For example, seamless square tube and square tube are collectively referred to as square tube, and seamless square tube is one of them. The four corners of the tube are round in shape, but the size of the tube is the same.
Square and rectangular tubes are industrial consumables, which generally involve large quantities of procurement. The procurement personnel also need to sort out relevant data during procurement. The above customized standards of seamless square and rectangular tubes manufacturers and the specification and size table of square and rectangular tubes can provide reference for procurement personnel, and more direct data will be generally provided by manufacturers.
01 DERECT DEAL
We have been specialized in
producing steel for 21 years
- 02 COMPLETE
- SPECIFICATIONS
OD:Customized according to customer requirements
Thickness:6-60mm
Length:1-24M or as required
3 CERTIFICATION IS
COMPLETE
can produce steel pipe products of world
stardard,such as European standard,American standard,
Japanese standard,Astralian standard,natinal standard
and so on.
04 LARGE INVENTORY
Common specifications perennial inventory of
200000 tons
THE ONLY
rectangular tube manufacturer selected into the top ten steel tube brands in China
THE QUALIFIED RATE OF PRODUCTS >100%
A: We are factory.
A: Generally it is 5-10 days if the goods are in stock. or it is 30 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge with the cost of freight paid by customer.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD 30% T/T in advance ,balance before shippment.If you have another question, pls feel free to contact us as below
The company attaches great importance to the quality of products, invests heavily in the introduction of advanced equipment and professionals, and goes all out to meet the needs of customers at home and abroad.
The content can be roughly divided into: chemical composition, yield strength, tensile strength, impact property, etc
At the same time, the company can also carry out on-line flaw detection and annealing and other heat treatment processes according to customer needs.
https://www.ytdrintl.com/
E-mail :sales@ytdrgg.com
Tianjin YuantaiDerun Steel Tube Manufacturing Group Co., Ltd. is a steel pipe factory certified by EN/ASTM/ JIS specializing in the production and export of all kinds of square rectangular pipe, galvanized pipe, ERW welded pipe, spiral pipe, submerged arc welded pipe, straight seam pipe, seamless pipe, color coated steel coil, galvanized steel coil and other steel products.With convenient transportation, it is 190 kilometers away from Beijing Capital International Airport and 80 kilometers away from Tianjin Xingang.
Whatsapp:+8613682051821
