Galvanized square steel pipe
Because the galvanized square pipe is galvanized on the square pipe, so the application scope of galvanized square pipe has been greatly expanded compared with the square pipe. It is mainly used in curtain wall, construction, machinery manufacturing, steel construction projects, shipbuilding, solar power generation bracket, steel structure engineering, power engineering, power plant, agricultural and chemical machinery, glass curtain wall, automobile chassis, airport and so on.
Hot dip galvanized square tube - hot dip galvanized square tube - hot dip galvanized rectangular tube is used to make molten metal react with the iron substrate to form an alloy layer, which combines the substrate with the coating. For hot galvanizing, the steel pipe shall be decorated to remove the iron oxide on the surface of the steel pipe. After pickling, the tank shall be cleaned with ammonium chloride or zinc chloride aqueous solution or mixed aqueous solution of ammonium chloride and zinc chloride, and then sent to the galvanized steel pipe heated in the bath. There are many factors affecting the quality of galvanized strip steel. For example, sulfur will significantly weaken the toughness of steel. The addition of sulfur will easily lead to steel deformation and brittle cracks.
Therefore, to ensure the quality of steel, it is necessary to reduce the sulfur content. In addition, phosphorus also has a significant impact on the toughness of steel, which is more severe at low temperatures. Storage location. It cannot be placed in the open air, because it can not only prevent various products from being stolen, but also prevent corrosion. The open-air site is sensitive to various extreme weather conditions. Hot dip galvanized square and rectangular tubes are widely used in construction, machinery, coal mine, chemical industry, electric power, railway vehicles, automobile industry, highways, bridges, containers, sports facilities, agricultural machinery, petroleum machinery, exploration machinery, greenhouse construction and other manufacturing industries.
square and rectangular hollow section Specification sheet
| O.D. mm | W.T.mm | O.D mm | W.T. mm | O.D mm | W.T. mm | O.D mm | W.T. mm |
| 20*20 | 1.3 | 60*120 80*100 90*90 | 1.50 | 180*180 | 3 | 300*800 400*700 550*550 500*600 | |
| 1.4 | 1.70 | 3.5-3.75 | 9.5-9.75 | ||||
| 1.5 | 1.80 | 4.5-4.75 | 11.5-11.75 | ||||
| 1.7 | 2.00 | 5.5-7.75 | 12-13.75 | ||||
| 1.8 | 2.20 | 9.5-9.75 | 15-50 | ||||
| 2.0 | 2.5-4.0 | 11.5-11.75 | |||||
| 20*30 25*25 | 1.3 | 4.25-4.75 | 12.0-25.0 | ||||
| 1.4 | 5.0-6.3 | 100*300 150*250 200*200 | 2.75 | 300*900 400*800 600*600 500*700 | |||
| 1.5 | 7.5-8 | 3.0-4.0 | 9.5-9.75 | ||||
| 1.7 | 50*150 60*140 80*120 100*100 | 1.50 | 4.5-9.75 | 11.5-11.75 | |||
| 1.8 | 1.70 | 11.5-11.75 | 12-13.75 | ||||
| 2.0 | 2.00 | 12.5-12.75 | 15-50 | ||||
| 2.2 | 2.20 | 13.5-13.75 | |||||
| 2.5-3.0 | 2.5-2.75 | 15.5-30 | |||||
| 20*40 25*40 30*30 30*40 | 1.3 | 3.0-4.75 | 150*300 200*250 | 3.75 | 300*1000 400*900 500*800 600*700 650*650 | ||
| 1.4 | 5.5-6.3 | 4.5-4.75 | |||||
| 1.5 | 7.5-7.75 | 5.5-6.3 | 9.5-9.75 | ||||
| 1.7 | 9.5-9.75 | 7.5-7.75 | 11.5-11.75 | ||||
| 1.8 | 11.5-16 | 9.5-9.75 | 12-13.75 | ||||
| 2.0 | 60*160 80*140 100*120 | 2.50 | 11.5-11.75 | 15-50 | |||
| 2.2 | 2.75 | 13.5-30 | |||||
| 2.5-3.0 | 3.0-4.75 | 200*300 250*250 | 3.75 | 400*1000 500*900 600*800 700*700 | |||
| 3.25-4.0 | 5.5-6.3 | 4.5-4.75 | |||||
| 25*50 30*50 30*60 40*40 40*50 40*60 50*50 | 1.3 | 7.5-7.75 | 5.5-6.3 | 9.5-9.75 | |||
| 1.4 | 9.5-16 | 7.5-7.75 | 11.5-11.75 | ||||
| 1.5 | 75*150 | 2.50 | 9.5-9.75 | 12-13.75 | |||
| 1.7 | 2.75 | 11.5-11.75 | 15-50 | ||||
| 1.8 | 3.0-3.75 | 12-13.75 | |||||
| 2.0 | 4.5-4.75 | 15.5-30 | |||||
| 2.2 | 5.5-6.3 | 200*400 250*350 300*300 | 4.5-6.3 | 500*1000 600*900 700*800 750*750 | |||
| 2.5-3.0 | 7.5-7.75 | 7.5-7.75 | 9.5-9.75 | ||||
| 3.25-4.0 | 9.5-16 | 9.5-9.75 | 11.5-11.75 | ||||
| 4.25-4.75 | 80*160 120*120 | 2.50 | 11.5-11.75 | 12-13.75 | |||
| 5.0-5.75 | 2.75 | 12-13.75 | 15-50 | ||||
| 5.75-6.3 | 3.0-4.75 | 15.5-30 | |||||
| 40*80 50*70 50*80 60*60 | 1.3 | 5.5-6.3 | 200*500 250*450 300*400 350*350 | 5.5-6.3 | 500*1100 600*900 700*800 750*750 | ||
| 1.5 | 7.5-7.75 | 7.5-7.75 | 9.5-9.75 | ||||
| 1.7 | 9.5-9.75 | 9.5-9.75 | 11.5-11.75 | ||||
| 1.8 | 11.5-20 | 11.5-11.75 | 12-13.75 | ||||
| 2.0 | 100*150 | 2.50 | 12-13.75 | 15-50 | |||
| 2.2 | 2.75 | 15.5-30 | |||||
| 2.5-3.0 | 3.0-4.75 | 280*280 | 5.5-6.3 | 600*1100 700*1000 800*900 850*850 | |||
| 3.25-4.0 | 5.5-6.3 | 7.5-7.75 | 9.5-9.75 | ||||
| 4.25-4.75 | 7.5-7.75 | 9.5-9.75 | 11.5-11.75 | ||||
| 5.0-6.0 | 9.5-9.75 | 11.5-11.75 | 12-13.75 | ||||
| 40*100 60*80 70*70 | 1.3 | 11.5-20 | 12-13.75 | 15-50 | |||
| 1.5 | 100*200 120*180 150*150 | 2.50 | 15.5-30 | ||||
| 1.7 | 2.75 | 350*400 300*450 | 7.5-7.75 | 700*1100 800*1000 900*900 | |||
| 1.8 | 3.0-7.75 | 9.5-9.75 | 11.5-11.75 | ||||
| 2.0 | 9.5-9.75 | 11.5-11.75 | 12-13.75 | ||||
| 2.2 | 11.5-20 | 12-13.75 | 15-50 | ||||
| 2.5-3.0 | 100*250 150*200 | 3.00 | 15.5-30 | ||||
| 3.25-4.0 | 3.25-3.75 | 200*600 300*500 400*400 | 7.5-7.75 | 800*1100 900*1000 950*950 | |||
| 4.25-4.75 | 4.25-4.75 | 9.5-9.75 | 11.5-11.75 | ||||
| 5.0-6.3 | 9.5-9.75 | 11.5-11.75 | 12-13.75 | ||||
| 50*100 60*90 60*100 75*75 80*80 | 1.3 | 11.5-11.75 | 12-13.75 | 15-50 | |||
| 1.5 | 12.25 | 15.5-40 | |||||
| 1.7 | 140*140 | 3.0-3.75 | 300*600 400*500 400*400 | 7.5-7.75 | 900*1100 1000*1000 800*1200 | ||
| 1.8 | 4.5-6.3 | 9.5-9.75 | |||||
| 2.0 | 7.5-7.75 | 11.5-11.75 | 20-60 | ||||
| 2.2 | 9.5-9.75 | 12-13.75 | |||||
| 2.5-3.0 | 11.5-25 | 15.5-40 | |||||
| 3.25-4.0 | 160*160 | 3.00 | 400*600 500*500 | 9.5-9.75 | 1100*1000 1100*1100 | ||
| 4.25-4.75 | 3.5-3.75 | 11.5-11.75 | 20-60 | ||||
| 5.0-5.75 | 4.25-7.75 | 12-13.75 | |||||
| 7.5-8 | 9.5-25 | 15.5-40 |
01 DERECT DEAL
We have been specialized in
producing steel for many years
- 02 COMPLETE
- SPECIFICATIONS
OD:10*10-1000*1000MM 10*15-800*1100MM
Thickness:0.5-60mm
Length:1-24M
3 CERTIFICATION IS
COMPLETE
can produce steel pipe products of world
stardard,such as European standard,American standard,
Japanese standard,Astralian standard,natinal standard
and so on.
04 LARGE INVENTORY
Common specifications perennial inventory of
200000 tons
THE ONLY
rectangular tube manufacturer selected into the top ten steel tube brands in China
THE QUALIFIED RATE OF PRODUCTS >100%
A: We are factory.
A: Generally it is 5-10 days if the goods are in stock. or it is 30 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge with the cost of freight paid by customer.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD 30% T/T in advance ,balance before shippment.If you have another question, pls feel free to contact us as below
The company attaches great importance to the quality of products, invests heavily in the introduction of advanced equipment and professionals, and goes all out to meet the needs of customers at home and abroad.
The content can be roughly divided into: chemical composition, yield strength, tensile strength, impact property, etc
At the same time, the company can also carry out on-line flaw detection and annealing and other heat treatment processes according to customer needs.
https://www.ytdrintl.com/
E-mail :sales@ytdrgg.com
Tianjin YuantaiDerun Steel Tube Manufacturing Group Co., Ltd. is a steel pipe factory certified by EN/ASTM/ JIS specializing in the production and export of all kinds of square rectangular pipe, galvanized pipe, ERW welded pipe, spiral pipe, submerged arc welded pipe, straight seam pipe, seamless pipe, color coated steel coil, galvanized steel coil and other steel products.With convenient transportation, it is 190 kilometers away from Beijing Capital International Airport and 80 kilometers away from Tianjin Xingang.
Whatsapp:+8613682051821
